Aretas IAQ Monitors · Indoor air quality, measured

Stop guessing what's in the air.
Measure it, room by room.

Wireless indoor air quality monitors that measure CO₂, particulates, VOCs, temperature and humidity, plus the specific gases your site cares about, and stream every reading to a real-time dashboard. "It feels stuffy in here" becomes a trend line you can point to.

CO₂ · PM1/2.5/10 · tVOC Temp & RH Optional gas sensors Wi-Fi · XBee · LoRa
Aretas Gen5 Sentinel indoor air quality monitor

Gen5 Sentinel shown. Other models differ in appearance.

Three monitors. One cloud. Every reading on the record.

0core measurements: CO₂, PM, tVOC, temperature, humidity
0optional gas sensors, from CO to formaldehyde
0monitor platforms to match the job
0continuous monitoring on your reporting interval
Why monitor indoor air quality?

Air changes all day. Spot checks don't.

Rooms fill and empty, schedules change, and processes, cleaning products and outdoor air all change what's in a space. A handheld reading tells you about one moment. A monitor on the wall tells you what the room was doing every hour since it went up.

Three colleagues at a laptop in a bright open-plan office, with an Aretas indoor air quality monitor on the desk beside them
Measured where people work. CO₂, particulates, VOCs, temperature and humidity, logged from the room itself, hour by hour.

See how each room changes

CO₂, particulates, VOCs, temperature and humidity, charted room by room and hour by hour, so patterns a single walkthrough would miss are easy to spot.

Give your building team the data

Share measured trends with your facilities staff, HVAC contractor or consultant, so conversations about your building start from a record instead of a hunch.

Answer complaints with a record

When someone reports a stuffy room or an odour, pull up the history instead of guessing. Every reading is time-stamped, charted and exportable.

What you get

An IAQ monitor built to your list.

Start with the core measurements and add the sensors your space calls for. Every monitor reports to the same Aretas IoT Cloud, so a mixed fleet still reads as one system.

🎛️Configured to order

Choose the sensors each monitor carries, from the core five to a multi-gas build. Pay for what you'll actually measure.

🫧Particulates by size

Laser particle counting reports PM1, PM2.5 and PM10 mass concentrations, with optional counts by particle size from 0.3 to 10 µm.

🧪Gases on request

Add CO, NO₂, ozone, SO₂, H₂S, ammonia, formaldehyde or a PID VOC sensor (options vary by model) when your site needs more than the core five.

🔊More than air

The Gen5 Sentinel can also report sound level, light, barometric pressure and vibration, so one device covers more of the room.

📡Wireless, your way

2.4 GHz Wi-Fi on every model, with 900 MHz / 2.4 GHz XBee and LoRa options on select models. No network drops needed at every wall.

🔔Alerts at your thresholds

Alert when a reading goes above or below a user-defined threshold for longer than your hold time. SMS and email go out naming the monitor and the reading.

How it works

From box to dashboard in minutes.

Pick your configuration

Tell us what you want to measure. We'll recommend a monitor and the sensors to fit it, and ship it configured.

Place it and power it

Fix it to a wall in the space, or lay it flat on a desk or shelf on its rubber feet. Connect DC power and join your Wi-Fi or an Aretas wireless network. It reports on the interval you configure.

See it. Act on it.

Real-time dashboards, floor plans and threshold alerts on any phone, tablet or PC. Trends build over days and weeks, ready to export whenever someone needs the numbers.

Included with every monitor

The hardware is only half the product.

Every Aretas IAQ monitor includes access to the Aretas IoT Cloud, the same platform that powers our full sensor line. No per-seat licenses, no surprise add-ons.

Daily AI briefingA plain-language summary of what changed at each location and which readings stand out.
Ask your buildingType a question like "why is room 204 stuffy in the afternoon?" and get an answer drawn from your own readings.
Real-time dashboardsLive readings, trends and daily rhythms for every room and every measurement.
Floor plans & 3D viewsSee every monitor in place on your floor plans, maps and a 3D building view.
Threshold alertsSMS & email when a reading goes above or below a user-defined threshold for longer than your hold time.
Exports & REST APIOne-click CSV and chart exports, or pipe readings into your BAS, CMMS or own applications.
Aretas IoT Cloud live data view with temperature, humidity, CO₂, VOC, particulate, pressure, sound and light readings and a trend chart
Live data: every measurement from a monitor, streaming onto one trend chart
Aretas IoT Cloud 3D building view with monitors placed floor by floor
Every monitor in place, floor by floor
Technical specifications

Three monitors. One spec sheet.

Gen5 Sentinel

Our flagship indoor environment monitor. The core air measurements plus sound level, light, barometric pressure and vibration in one compact unit.

A800016

Commercial IAQ monitor. The core air measurements and sound level, with on-board positions for a CO cell and a PID VOC sensor.

A800046

Configurable multi-gas monitor. The core air measurements plus electrochemical gas cells, each set up for the cell you choose when we build it.

Core measurements
CO₂ · PM1 / PM2.5 / PM10 · tVOC · temperature · relative humidity
CO₂
NDIR (non-dispersive infrared) · 400 – 5,000 ppm standard · other sensor options and ranges available on request
Particulate matter
Laser scattering · PM1, PM2.5, PM10 in µg/m³ (0 – 500 µg/m³ effective range) · optional particle counts at 0.3, 0.5, 1, 2.5, 5 and 10 µm
tVOC
Metal-oxide (MOS) total VOC sensor · PID VOC sensor optional on A800016 and A800046
Temperature & humidity
Digital sensor · ±0.2 °C and ±2 % RH typical
Optional gas sensors
CO · NO₂ · O₃ · SO₂ · H₂S · NH₃ (ammonia) · HCHO (formaldehyde) · PID VOC · availability and range vary by model and cell, so ask us
A800046 gas channels
Up to four 16-bit analog channels for electrochemical cells and PID · each channel configured for its cell at build time · plus a serial port for digital gas modules
Additional sensing
Gen5 Sentinel: sound level (dB), light (lux), barometric pressure, vibration · A800016: sound level (dB)
Reporting interval
User-configurable
Warm-up
MOS tVOC sensor: up to 48 h on first power-up, 30 – 60 min after a power interruption · electrochemical cells may need a longer run-in
Wireless connectivity
Wi-Fi 2.4 GHz (all models) · XBee / Zigbee 900 MHz or 2.4 GHz (A800016, A800046) · LoRa (A800046)
Power
Gen5 Sentinel: 5 V DC adapter (2.1 mm barrel, centre positive) included · A800016: 9 – 32 VDC or USB · A800046: 7.5 – 12 VDC
Environment
Indoor use · non-condensing
Software
Aretas IoT Cloud: dashboards, floor plans, alerts, daily AI briefing, long-term storage, CSV export, REST API

Need a configuration you don't see here? Most of our deployments include some customization — ask us.

Where it earns its keep

Built for buildings that want the numbers.

Offices & commercial real estate

Track CO₂, temperature and humidity floor by floor, see how readings follow occupancy, and answer tenant comfort questions with data.

Schools & campuses

See how CO₂ and temperature trend in each classroom through the day, with a time-stamped record your facilities team can review.

Property management

Monitor common areas, suites and amenity spaces across a portfolio. Spot humidity, odour and comfort patterns before they turn into service calls.

Hospitality

Keep an eye on guest rooms, conference spaces and back-of-house areas from one dashboard, with time-stamped history for every space.

Laboratories & light industrial

Add the gas sensors your process involves and see their readings alongside particulates, temperature and humidity on one dashboard.

Facilities & operations teams

Every monitored space on one dashboard, with CSV exports and a REST API to bring readings into your BAS, CMMS or energy-management tools.

Good questions

Everything else you're wondering.

Which IAQ monitor is right for my building?

For offices, classrooms and common areas, the Gen5 Sentinel or A800016 covers CO₂, particulates, VOCs, temperature and humidity, with sound level as well. If you need specific gases such as CO, NO₂, ozone, SO₂, H₂S, ammonia or formaldehyde, or a PID VOC sensor, the A800046 takes those options. Tell us what you want to measure and we'll recommend a configuration.

How is an IAQ monitor installed?

Mount it on a wall in the space you want to monitor, connect DC power, and join it to your network. Readings appear in your dashboard. No wiring runs between the monitor and the cloud.

Do I need Wi-Fi in every room?

Every model supports 2.4 GHz Wi-Fi. The A800016 and A800046 are also available with 900 MHz or 2.4 GHz XBee radios, and the A800046 with LoRa, so units can reach an Aretas gateway in buildings where Wi-Fi coverage is patchy.

Is there a warm-up period?

Yes, for the metal-oxide VOC sensor. On first power-up it can take up to 48 hours to stabilize, and after any later power interruption allow 30 minutes to an hour. Electrochemical gas cells can need a longer run-in. CO₂, particulate, temperature and humidity readings are available much sooner.

Will the monitor tell me whether my air is safe or healthy?

No. Aretas monitors measure and record environmental conditions and notify you when a reading crosses a threshold you set. They don't determine whether a space is safe, healthy or compliant. If you need that judgment, the data can be exported for a qualified professional to review.

Where does my data live — and who owns it?

Your readings stream to the Aretas IoT Cloud with long-term storage. The data is yours: view it, export it as CSV, or pull it into your BAS, CMMS or other systems through the REST API.

How do I get pricing?

Tell us how many spaces you want to monitor and what you'd like to measure, and we'll send a quote, usually within one business day. Many sites start with a handful of rooms and expand from there.

Intended use: Each Aretas IAQ monitor is a measurement and monitoring product. It measures, records and reports environmental conditions for general information and trend analysis. It is not a safety device and is not designed to control building systems or equipment. Readings, alerts and AI-generated summaries are informational only, and alerts depend on power, network and service availability. Aretas devices and software are not designed, marketed or warranted for safety-critical, life-safety, public-safety or building-control use. Aretas does not assess or certify whether any building, system or environment is safe or compliant; those decisions rest with the owner and their qualified professionals.

Put a number on every room's air.

Tell us about your spaces and we'll send pricing plus a recommended product configuration — usually within one business day.